Dimension | L:2100mm W:970mm H:500mm |
Bed surface | Whole board punching |
Head/foot Board | ABS head/foot board |
Back-Rest | 0°-75°±5° |
Leg-Rest | 0°-75°±5° |
Features:
1.Bed plate: The bed surface steel plate is ≥ 1.0mm thick,
integrally stamped and formed, with a reinforcement design behind
the steel plate, 80 air vents, and a mattress anti-skid design. The
bed surface is smooth throughout, with a smooth feel like satin
without scratching your hands; Eliminating the drawbacks of
traditional hospital beds that are bulky and stuffy, the neatly
arranged ventilation hole design on the bed surface is beneficial
to long-term bedridden patients;
2. The bed body is of a steel plastic structure, with a bed frame
wall thickness of 1.25 mm. The bed surface steel plate has a
humanized design, and the four corners have anti impact ABS
corners, which have the function of preventing scratches; The color
is consistent with the bed, making it more integrated.
3. The welding quality of the bed body is solid and firm, with a
smooth and smooth texture after spraying. The welded interface is
almost invisible, and the bed can carry a load of ≥ 200 kg.
4. The headboard and tailboard of the bed are integrally blown and
formed with imported ABS. The headboard is high and the tailboard
is low, with a locking system and stress expansion strength
enhancement design. The tailboard of the bed has a headcard slot,
and the outer side of the slot is also designed with a soft color
corner protection film of the same material, which can withstand
strong pressure and impact without damaging the structure; The
streamlined design of the headboard and tailboard of the bed is
novel and beautiful, does not accumulate dust, is easy to clean,
and can be cleaned once wiped; There are two handrails on the upper
left and right sides of the head and tail plate of the bed, which
are convenient for nursing personnel to move the bed, as well as
for assembly and disassembly; A long arc shaped opening is also
provided at the upper middle to facilitate carrying after
disassembly; Soft and high-end colors, diverse styles, available
for selection
ABS manual double shake hemodialysis nursing bed frame material:
bed frame adopts 30 × sixty × Welding of 2.0 ㎜ rectangular carbon
steel pipe; The bed panel is integrally stamped with high-quality
1.2mm thick cold-rolled steel plate. The entire bed panel has 80
concave air holes to alleviate the ventilation of the patient's
body, and has anti-corrosion functions. The bed back panel uses a
dual support bottom beam, which is sturdy and durable. The bed
panel thickness is ≥ 1.2mm.
The bed can carry ≥ 240kg; High and low dynamic load ≥ 170kg
Function:
Can adjust the angle of the bed's back plate and foot plate at will
to increase comfort. Back lift 0-75 ° ± 5 °; Leg rise: 0-75 ° ± 5
°.
The metal surface is treated with dual spraying technology. This
technology not only enables the bed to have a plump appearance,
good luster, light color, high hardness, high solids content, wear
resistance, heat resistance, solvent resistance, and moisture
resistance, but also has no pores, inclines, curves, and sand
marks, bumps, and other places left after polishing. It does not
cause sagging on vertical or curved surfaces, achieving a smooth
and flat paint film, displaying a satisfactory use effect.
